System X Base Autococker
The Paintball marker that gives more emphasis on performance than the physical appearance is the X Base. This explains why this marker is not as physically attractive as the other marker, thus making it look very simple.
Features
This System X Base Autococker is bit comparable to the 2003 WGP Autococker in the aspects of the looks and performance.
The stock barrel of the SX Base Autococker is an advantage compared to others. The feedport of the Autococker permits the marker to look a little shorter in stature. The bolt design of the marker is accessible that in a matter of seconds, the bolt can be easily disassembled, the breech, internals, and the barrel can be easily cleaned and replaced.
However, the Pneumatics is uncunningly equipped on the gun that makes it unfamiliarly looking in the eyes of users of conventional Autocockers. The three- way ram of the SX Base Autococker is a bit sticky and uneven. The pull is not that easy to manipulate because of the trigger frame though the trigger is designed with an adjustable pull, snatch grip, and a removable beaver tail.
Appearance
Many users of paintball markers perceive that the SX Base Autococker is not at all physically impressive so upgrading this marker specifically its pneumatics, grip frame, barrel, and regulator will somehow contribute to the enhancement of its beauty and performance.
Balance
Autocockers are designed in a manner that the inline regulator or the fore grip is proximate to the grip frame hence making the marker well balanced.
Performance and Accuracy
The SX Base Autococker, when used with a Centerflag Hyperfolow HPA Tank and a vidoeloader 12V Revolution can shoot from 8-10 BPS on a consistent mode. The vertical feed contributed in easifying the problems in blowback, thus few problems on chops are encountered. The pneumatics did not skip or misfire even once- indeed preciseness is really remarkable.
The Stock marker performs well despite minor or very little spread was encountered though this may really be expected. The Stock System Autococker is accurate yet a good barrel system and a reliable air system should support this marker to expect the consistent accuracy. The problems encountered in the use of SX Base Autococker can still be easily solved and fixed by its manufacturer. It can however, be noted that the X Base Autococker can compete very well with the 2003 WGP Autococker, though the latter is better recommended.
Some of the strengths and good features of the SX Base Autococker are the following: it is upgradeable, versatile which means higher the HPA or CO2 may be used, it is very accurate especially when a good barrel system is used with it, there are very minimal chops when a fast loader is used and when short- stroking the trigger is avoided, it is symmetrical and very light weight, and lastly it has low kick. On the otherhand, the SX Base Autococker’s limitations are the following: it has unsmooth trigger frame, three- way, and ram; there are many enhancements need to be done on its barrel and regulator; the hoppers and the feedtube are mismatch; most of its parts look inexpensive (specifically the beaver tail, the three- way, and the pneumatic regulator), and not that durable.